I think my shoulder holsters have always been my most popular model. This is an example for the very popular Wilson Combat SFX9 with a 3.5 inch barrel and optics cut.
This version was done in genuine full coverage nicotine elephant. The holster body and mag pouch have a smooth leather lining to help reduce wear on the finish and speed the draw a bit. The fully adjustable harness features all steel hardware. As with all my straps the adjustment holes get brass grommets to reduce the chances of tearing out over time. As a finishing touch this one was sewn with black thread.
I can build a shoulder rig for over 200 guns and with numerous exotic skins or custom carving options, so if you have an idea for a custom rig please contact me today and we can get started!
As always thanks for looking and your continued support!
Eric Kelley
Nicotine Elephant Shoulder Holster for a Wilson Combat SFX9 3.5 inch
Today I’m posting a matching sling and Butt-Cuff set in Genuine Nicotine Elephant I did for a Ruger No. 1 in 375 Holland and Holland.
The Sling is my thumb-hole design and is 42 inches long. This one has a non slip leather backing, has brass grommets in all the adjustment holes to prevent the weight of the rifle from causing the holes to enlarge and tear out over time. For this one I covered the front in full coverage genuine Nicotine Elephant.
The matching stock cover also has a non slip backing to prevent damage to your stock and the grommets in the holes. This one also has loops to hold 5 375 H&H shells.
I can do these for about any rifle and caliber and in many different styles, send me an email with your ideas and we can start your set today!
Thanks for taking the time to look, and for your continued support!
Tiger-Sling in Genuine Elephant with natural thread for a Ruger Number 1 in 375 H&HCloseup of the thumb-hole for stability while carryingCloseup of the Genuine Elephant GrainTiger-Cuff Stock Cover with loops for 5 375 H&H Magnum cartridgesBackside of the Tiger-Cuff with some nice Elephant Grain
One of my Hanging Tiger shoulder holsters for an Sig Sauer 5 inch 1911 with the rail. This version is in Genuine Nicotine Elephant. The holster and mag pouches were built with a smooth leather interior to help protect the finish and speed the draw a bit. All the components are full coverage with the Elephant. As with all my holsters I use only all steel hardware and the shoulder straps include brass grommets to help prevent the adjustment holes from enlarging and tearing out over time. I can build this model for numerous guns and with several different exotic skin and leather combinations.
As always thanks for looking and your support!
Eric Kelley
Full Coverage Genuine Elephant Shoulder Holster for a 5 inch 1911 Holster with thumb break Full coverage straps with all steel hardware and brass grommeted adjustment holesThe back piece with swivel shoulder straps. Dual mag pouch is standard on all my shoulder rigs.
This is a set I did a while back for a good friend. Both Tiger Cuffs were made for A Remington Model 48 16 gauge shotgun. These were both done in light brown with some custom stamping. My buddy sent me some pics of them mounted on his guns, and I’ve included them here. As time goes on I do intend to add some more carving and stamping options to these. All of my Stock Cuffs feature a non slip leather backing to protect the stocks finish and all of the holes have brass grommets to prevent the holes enlarging over time and tearing out. If you have an idea for a custom design send me an email and we can start your custom design!
As always thanks for the support!
Eric
16 gauge stock cuff with custom stamping.
5 16 gauge shells
Closeup of the stamping and grommets installed to reduce wear and tear on the holes.
Shoulder Holsters have always kinda been my signature pieces and here we have one for a Wilson Combat SFX 9 3.5 inch. This time I built the rig to accommodate a Trijicon SRO red dot site.
The holster is built with a smooth lining to protect the guns finish and speed the draw. The mag pouch was built to hold double stack mags and was made to hold full-size mags for a little extra piece of mind.
The fully adjustable harness has all metal hardware as do the other two pieces. All of the adjustment holes have brass grommets installed to prevent the holes tearing out.
For a final touch the client sent me a set of Wilson Combat grip medallions which were sewn onto the shoulder straps for a bit of bling!
The entire rig is finished in Genuine Legally Imported Black Elephant adding some real class to the build. I can build these for numerous guns and with several different options, send me your ideas anytime and we can design your rig!
Genuine Black Elephant for a Wilson Combat SFX 9Optic Cut Holster module for a Trijicon SRO 2 inch wide shoulder straps with Wilson Combat grip medallions inset Wilson Combat Medallions on Elephant The back piece with brass grommets installed for long life Double Stack Mag pouch for offside balance!
This was another custom Tiger Sling that was made for Christmas! This one featured Turquoise and black dye. For a special added touch I stamped the owners initials. As with all of my slings this one features a thumb hole. The adjustment holes have brass grommets to keep the holes from tearing out over time and use. As a finishing touch it is lined with a non slip leather backing.
I can build these with numerous stamping, color, thread color, and even exotic skins! Let me know your thoughts and we can get started on yours today!
Turquoise and black rifle sling with Texas Stamp and thumb hole Owners initials and custom Texas Basketweave stamping Closeup of the two tone dye!
One of my Tiger Slings with a Texas Basketweave! The sling is 42 inches long, and has a thumb hole. This one is lined with a non slip leather backing. The adjustment holes have metal grommets installed to prevent tearing out over time.
This one is available in the store for immediate delivery.
I can build these in numerous variations please let me know what you have in mind!
Thanks For Looking,
Eric
Black with custom Texas basket weaveCustom Texas BasketweaveTexas Basketweave with thumbhole.
My Thumb-Break Tiger has been a great seller for me lately and here is another example in Genuine Black Elephant. This set was a custom order and is obviously left handed! The client asked for a dual offside pouch to carry his favorite light and a spare mag. As with all my exotic holsters this one was built with a smooth leather interior to help protect the guns finish. The belt loops are sized to fit even the thickest gun belts.
I have plenty of Elephant in stock and would love to discuss your ideas at anytime!
Genuine Black Elephant Thumb-Break Tiger with matching light and mag pouch in Left Hand!
One of my Tiger Slings, this one customized with the clients initials and custom Texas basketweave pattern. This one is our standard 44 inches long and was done in blue with a black overlay and blue stitching. I could do this in about any color and the basketweave pattern can be done in several different variations. As with all my slings the thumbhole is standard and the back of the sling is lined in non-slip leather.
Let me know your custom ideas and I’ll do my best to make it happen!
Thanks, Eric
Tiger Rifle Sling in blue with black overlayCustom initials and Texas BasketweaveTexas BasketweaveThumbhole with blue stitching
This was a custom order for one of my Tiger Hunter hunting belt combinations. This build features my 2 inch wide polymer reinforced belt with the “gunfighter” stitch and custom genuine shark skin trim. The holster features a thumb break and again carries the shark theme. As with all these combos I custom tooled 4 belt keepers. At the clients request I built two speed loader pouches and a custom 6 shell 12 gauge shotgun shell carrier.
Thanks for taking the time to look I do deeply appreciate it and look forward to hearing from you with your custom ideas!
Tiger Hunter Combo for a 5 inch M&P2 inch wide belt with custom stitching and shark skin trimThe “gunfighter” stitchShark Skin Trim!A bit more shark!Speed-Loader Pouches with shark trim!Custom Tooled belt keepers5 inch Smith and Wesson Revolver with thumb-break and shark trim6 shell 12 gauge shell holder with shark trim
